Reduce HVAC-R energy consumption without replacing your system
Geoside and CryogenX4 offer an advanced nano fluid technology designed for existing air conditioning and refrigeration systems.
It improves heat transfer, reduces absorbed energy and can be installed without hardware modifications or system downtime.
It improves heat transfer, reduces absorbed energy and can be installed without hardware modifications or system downtime.
Request a free assessment of your system
I have read the terms regarding data treatment and I agree:
A technology already applied at scale
>15%
Energy consumption reduction on individual HVAC-R units
0
No downtime and no hardware modifications
20+
Years of product applications and testing
150K+
Installations worldwide
Why your system consumes more energy than necessary
Over time, even a full functioning system can become less efficient. The build-up of oil residues on the internal surfaces of heat exchangers can reduce heat transfer capacity. As a result, the system needs to operate for longer to maintain the same conditions, consuming more energy.Reduced efficiency
Even without visible faults, the system can lose performance over time.
Even without visible faults, the system can lose performance over time.
Less effective heat transfer
Dirt and oil reduce heat exchange on evaporator and condenser surfaces.
Dirt and oil reduce heat exchange on evaporator and condenser surfaces.
Greater compressor stress
The system operates for longer and under greater mechanical stress.
The system operates for longer and under greater mechanical stress.
Higher energy consumption
For the same level of service, the system absorbs more energy.
For the same level of service, the system absorbs more energy.
What is CryogenX4?
A nanofluid designed to improve the termale efficiente of HVAC and refrigerazione System.
CryogenX4 is introduce into the existing system and acts directly on the metal surface of the heat exchangers, improving heat transfer without structural or invasive interventions.
● Installed on existing system
● No hardware modificazione or system downtime
● Compatible with the main HVAC-R system and refrigerants
● Immediate benefit on system performance
CryogenX4 is introduce into the existing system and acts directly on the metal surface of the heat exchangers, improving heat transfer without structural or invasive interventions.
● Installed on existing system
● No hardware modificazione or system downtime
● Compatible with the main HVAC-R system and refrigerants
● Immediate benefit on system performance
How CryogenX4 works inside the system
1. Geoside analyses the existing system and definex the performance baseline. This creates a reliable benchmark to measure the benefit after the intervention.
2. CryogenX4 is introduce into the existing circuit. The interventi does not require replacements or hardware modifications.
3. It acts on the internal metal surfaces. The treatment helps reduce thermal resistance and improves contact between the refrigerant and heat exchange surfaces.
4. It chances heat transfer. The evaporator and condenser operate under more efficient conditions.
5. It reduce the energy required. The system achieves the same operating performance with lower absorbed energy.
The results are then compared with the baseline to measure and certify the actual benefit.
Request your free assessment today. Through a preliminary analysis, geoside identifies whether CryogenX4 is suitable for your operating context and estimates the potential economic savings.
2. CryogenX4 is introduce into the existing circuit. The interventi does not require replacements or hardware modifications.
3. It acts on the internal metal surfaces. The treatment helps reduce thermal resistance and improves contact between the refrigerant and heat exchange surfaces.
4. It chances heat transfer. The evaporator and condenser operate under more efficient conditions.
5. It reduce the energy required. The system achieves the same operating performance with lower absorbed energy.
The results are then compared with the baseline to measure and certify the actual benefit.
Request your free assessment today. Through a preliminary analysis, geoside identifies whether CryogenX4 is suitable for your operating context and estimates the potential economic savings.
Validated technology, Measurable results
The innovative solution by Geoside and CryogenX4 is supported by tecnica testing, industrial applications and performance measurement methodologies.
These validations have been conducted according to Industry standards and references such as AHRI, ASTM, EPA, ANSI and ASHRAE.
Before the intervention, Geoside assesses the operating conditions of the system and defines a measurement and verification approach that can be shared with the client.
Contact us to discover how much you could save with this technology.
These validations have been conducted according to Industry standards and references such as AHRI, ASTM, EPA, ANSI and ASHRAE.
Before the intervention, Geoside assesses the operating conditions of the system and defines a measurement and verification approach that can be shared with the client.
Contact us to discover how much you could save with this technology.
Learn more
No. The intervention is designed to be carried out on existing systems without hardware modifications or system downtime, subject to technical verification.
CryogenX4 can be applied to HVAC-R systems such as chillers, rooftop units, heat pumps and refrigeration systems, subject to compatibility checks.
The benefit depends on the characteristics of the system, its operating condition and usage profile. This is why Geoside provides a preliminary assessment and a performance measurement approach.
The installation is a one-time application and the technology is designed to last for the remaining lifetime of the system.
The result is measured by comparing system performance before and after the intervention, using a methodology shared with the client.
The solution is compatible with the main refrigerants currently in use, including ammonia.
